proFPGA

News

November 2017
PRO DESIGN announces Partnership with AcconSys as new Distributor in China and Hongkong for its proFPGA Product Family [more]
June 2017
PRO DESIGN Expands Prototyping Portfolio with ultra-fast proFPGA Virtex® UltraScale+™ based FPGA Modules [more]
February 2017
PRO DESIGN Launches Intel® Stratix® 10-based High-Speed Multi FPGA Prototyping Solution [more]
proFPGA quad V7
Technical highlights

Scaleable up to 48 M ASIC gates capacity on one board

Modular with up to 4 x Xilinx Virtex XC7V2000T FPGAs

Up to 4336 signals for I/O and inter FPGA connection

Up to 32 individually adjustable voltage regions

Up to 1.8 Gbps/12.5 Gbps point to point speed



proFPGA quad V7 FPGA Prototyping System Specification
   FPGAs    - Up to 4 Xilinx Virtex XC7V2000T FPGA Modules
   Capacity    - Up to 48 M ASIC gates on one board (12 M ASIC gates per FPGA Module)
   FPGA-internal memory    - Up to 186,048 kbits on one board (46,512 kbits per FPGA Module)
   Signaling rate    - Up to 1.8 Gbps (standard I/O)/ 12.5 Gbps (MGT)
   Extension sites    - Up to 32 Extension sites with High Performance (up to 21 Gbps) connectors
   I/O resources    - Overall 4336 signals for I/O and inter FPGA connection
     - 1084 free I/Os per FPGA Module
        - 4x148 I/Os to top side connectors
        - 3x148 and 1x48 I/Os to bottom side connectors
     - Single-ended or differential
   High Speed I/O transceivers    - 64 dedicated MGTs running up to 12.5 Gbps
     - 16 MGTs (12.5 Gbps) per FPGA Module
   FPGAs interconnections    - Flexible via high-speed interconnection boards or cables
   Voltage regions    - 32 individually adjustable I/O voltage regions
     - 8 individually adjustable voltage regions per FPGA Module
     - Stepless from 1.2 up 1.8V
     - Automated detection of daughter card and adjustment of right voltage
   Clocking    - 256 differential external clock inputs
     - 64 differential clock inputs per FPGA Module
     - 8 differential clock inputs per connector
   - 4 external clock/sync inputs/outputs over HF SMA connectors
   - X- local clocks
     - 8 global clock and sync signal inputs per motherboard
     - X fully synchronous derived clocks with sync signals
   Configuration    - With host software via Ethernet, USB 2.0, PCIe or standalone over USB stick
   Data exchange    - On board DMBI (Device Message Box Interface)
   - Data exchange rate:
     - Ethernet (up to 100 Mbps)
     - USB
     - PCIe (up to 4 Gbps)
   Power    External (optional) ATX Power Supply (12 V, 24 - 35 A output)
   Dimensions    - 11.81" x 0.95" x 12.20" / 300 mm x 24 mm x 310 mm (width x height x depth)
   - 2.5 kg weight

 

Partners
Xilinx Logo
Altera Logo
Linear
© 2017 PRO DESIGN Electronic GmbH. All Rights Reserved. Use of this site signifies your agreement of the Terms of Use.