February 2018
PRO DESIGN Introduces Zynq™ UltraScale+™ Based FPGA SoC and IP Prototyping Platform [more]
June 2017
PRO DESIGN Expands Prototyping Portfolio with ultra-fast proFPGA Virtex® UltraScale+™ based FPGA Modules [more]
February 2017
PRO DESIGN Launches Intel® Stratix® 10-based High-Speed Multi FPGA Prototyping Solution [more]
Stratix 10 FPGA Prototyping
Technical highlights

Scaleable up to 80 M ASIC gates capacity on one board

Modular with up to 4 x Intel® Stratix® 10 SG280 FPGAs

Up to 4104 signals for I/O and inter FPGA connection

Up to 32 individually adjustable voltage regions

Up to 1.0 Gbps single ended point to point speed

proFPGA quad Intel® Stratix® 10 SG280 FPGA Prototyping System Specification
   FPGAs    - Up to 4 x Intel® Stratix® 10 SG280 FPGA Modules
   Capacity    - Up to 80 Million ASIC gates on one board (20 Million ASIC gates per FPGA Module)
   FPGA-internal memory    - Up to 916 Mbit on one board (229Mbit per FPGA Module)
   Signaling rate    - Up to 1.0 Gbps single ended (standard I/O)/ up to 17.4 Gbps differential
   Extension sites    - Up to 32 extension sites with high speed connectors
   I/O resources    - Overall 4104 signals for I/O and inter FPGA connection
     - 1026 free I/Os per FPGA Module
        - 4x141 I/Os to top side connectors
        - 3x141 I/Os and 1x39 to bottom side connectors
     - Single-ended or differential
   High Speed I/O transceivers    - 96 dedicated high speed serial transceivers running up to 17.4 Gbps
     - 24 high speed serial transceivers per FPGA Module
   FPGAs interconnections    - Flexible via high-speed interconnection boards or cables
   Voltage regions    - 32 individually adjustable I/O voltage regions
     - 8 individually adjustable voltage regions per FPGA Module
     - Stepless from 1.2V up to 1.8V on 6 extension sites
     - Automated detection of daughter card and adjustment of right voltage
   Clocking    - 216 differential external clock inputs
     - 54 differential clock inputs per FPGA Module
     - 6 differential clock inputs per connector
   - Run-time configurable local clocks
     - 6 global clock and sync signal inputs per motherboard
     - Fully synchronous derived clocks with sync signals
   Configuration    - With host software via Ethernet, USB 2.0, PCIe or standalone over USB stick or JTAG
   Data exchange    - On board DMBI (Device Message Box Interface)
   - Data exchange rate:
     - Ethernet (up to 100 Mbps)
     - USB (480 Mbps)
     - PCIe (up to 3.5 Gbps)
   Power    External (optional) ATX Power Supply (12 V, 24 - 35 A output)
   Dimensions    - 11.81" x 0.95" x 12.20" / 300 mm x 24 mm x 310 mm (width x height x depth)
   - 2.5 kg weight


Xilinx Logo
Altera Logo
© 2018 PRO DESIGN Electronic GmbH. All Rights Reserved. Use of this site signifies your agreement of the Terms of Use.