February 2018
PRO DESIGN Introduces Zynq™ UltraScale+™ Based FPGA SoC and IP Prototyping Platform [more]
June 2017
PRO DESIGN Expands Prototyping Portfolio with ultra-fast proFPGA Virtex® UltraScale+™ based FPGA Modules [more]
February 2017
PRO DESIGN Launches Intel® Stratix® 10-based High-Speed Multi FPGA Prototyping Solution [more]
proFPGA quad V7
Technical highlights

Xilinx Zynq XC7Z100 FPGA

Dual ARM® Cortex™-A9 MPCore™ with CoreSight™

260 standard I/Os and 16 high speed serial transceivers

USB 2.0, Gigabit Ethernet, ARM JTAG, DDR3 & SPI Flash

Mix and match with other proFPGA FPGA modules

Further information and related links

The proFPGA product family is a complete, scalable, and modular multi FPGA Prototyping solution, which fulfills highest needs in the area of FPGA based Prototyping. Part of this modular and flexible system concept is the proFPGA Zynq™ 7000 FPGA module, which can be easily mounted on the proFPGA uno, duo or quad motherboard and mixed together with various other proFPGA FPGA modules like the proFPGA Virtex 7 2000T FPGA module. The proFPGA Zynq™ 7000 FPGA module addresses customers who require a complete embedded processing platform for high performance SoC Prototyping solution, IP verification and early software development.

Equipped with a Xilinx Zynq™ XC7Z100 FPGA which combines a user FPGA with an ARM Core Processor (Dual ARM® Cortex™-A9 MPCore™ with CoreSight™) and several on board interfaces like USB 2.0 OTG, Gigabit Ethernet or ARM JTAG debug interface the Board offers a complete embedded processing platform. Further the board already offers 1 GB on board DDR3 and dual quad SPI flash memory.

The FPGA module offers a total of 2 extension sites on the top with 260 standard I/Os and 16 high speed serial transceivers for extending the board with standard proFPGA or user specific extension boards.

proFPGA quad V7
proFPGA Xilinx Zynq 7000 XC7Z100 FPGA Module Specification
   FPGA type    - Xilinx Zynq XC7Z100 (speedgrade 1,2 )
   Capacity    - 2.7 M ASIC gates
   Embedded Processor Core    - Dual ARM® Cortex™-A9 MPCore™ with CoreSight™
   On Board Interfaces Processor Unit    - USB UART interface for debugging
   - USB 2.0 OTG
   - Gigabit Ethernet
   - ARM JTAG Connector for debugging
   - PL (Programmable Logic)
   - PS (Processing System)
   - System reset buttons
   On Board Memories Processor Unit    - 1 GB DDR3 memory
   - Dual Quad SPI Flash Memory
  Signal Rating    - Up to 1.2 Gbps (standard I/O)/ 12.5 Gbps (MGT)
  Extenion Sites    - 2 extension sites with high performance connectors
   I/O resources    - 260 per FPGA module
        - 1 x 148 I/Os to top side connector A1
        - 1 x 98 I/Os to top side connector A2
   - Single-ended or differential
   High speed I/O transceivers    - 16 per FPGA module
        - 1 x 8 MGTs (up to 12.5 Gb/s) to top side connector A1
        - 1 x 8 MGTs (up to 12.5 Gb/s) to top side connector A2
   Available interface boards    - USB 3.0, PCIe Gen2/Gen3, MIPI, DVI, DDR3 memory, Gb Ethernet, etc.
   Voltage regions    - 2 individually adjustable voltage regions per FPGA Module
   - Stepless from 1.2V up 3.3V for HR IOs and 1.2. to 1.8 for HP IOs
   On Board Clocking    - 1 x 33.333 MHz clock is generated for the ARM Core as system clock
   - 1 x 50 MHz are provided to the FPGA PL
   Clocking over proFPGA duo/quad    Motherboard    - 8 global clock and sync signal inputs per motherboard
   - X fully synchronous derived clocks with sync signals
   System Requirements    - Works only with proFPGA uno, duo or quad motherboard
   Configuration    - JTAG interface
   - On Board SD memory card
   Power    - External (optional) ATX Power Supply (12 V, 24 - 35 A output)
   Dimensions    - 5.91" x 0.95" x 5.91" / 150 mm x 24 mm x 150 mm (width x height x depth)
   - 0.25 kg weight
   Product article number    - PROF061 FM-XC7Z100-R4
   Order code    - PROF-FM-XC7Z100
Xilinx Logo
Altera Logo
© 2018 PRO DESIGN Electronic GmbH. All Rights Reserved. Use of this site signifies your agreement of the Terms of Use.